{"product_id":"connex-10-meter-radio-connex-3300hp","title":"Connex 10 Meter Radio - Connex 3300HP","description":"\u003cp\u003e\u003cstrong\u003eReplacing a discontinued Connex CX3400HP?\u003c\/strong\u003e The 3300HP is the direct successor — same 45W PEP power tier, same full-size chassis, same dual MOSFET finals, same front-panel 4-pin mic jack, plus native FM mode and a $60 Ranger SRA-198 noise-canceling mic in the box at a lower price. A CX3400HP install transfers to the 3300HP with no bracket or antenna changes.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eConnex 3300HP\u003c\/strong\u003e is a classic 10 meter mobile amateur radio — AM\/FM\/PA, dual MOSFET finals, front-panel mic jack, blue LED display, and a punchy 45W PEP output that's been the operator's daily-driver choice for over 20 years. It's not the highest-power radio in our catalog and it doesn't have SSB, but at $279 with a $60 Ranger SRA-198 noise-canceling mic in the box, it's one of the highest-value entry points to a real 10m mobile radio.\u003c\/p\u003e\n\n\u003ch3\u003eWho the 3300HP is for\u003c\/h3\u003e\n\u003cp\u003eThe 3300HP is the right radio for operators who want a \u003cstrong\u003esimple, proven AM\/FM mobile\u003c\/strong\u003e at legal-ish power without stepping up to the amp-deck complexity of the RCI-99N2 or the base-station form factor of the Longhorn. It's the radio for the driver who wants to turn a knob, key the mic, and be heard on 10 meters with no menus, no clarifiers to zero-beat, and no fine-tune settings to remember. It's also the radio for the operator on a tight vehicle electrical budget — the 3300HP draws roughly 7 amps on transmit, so a stock alternator and a modest battery handle it without upgrades.\u003c\/p\u003e\n\n\u003cp\u003eIt's \u003cstrong\u003enot\u003c\/strong\u003e the right radio if you need sideband (USB\/LSB), CW, a built-in frequency counter, a built-in SWR meter, or the ability to run 100W+ mobile. For those requirements, look at the Ranger RCI-99N2, the Longhorn Superior N6, or the Ranger RCI-69 Base Plus Plus V2.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes the 3300HP different\u003c\/h3\u003e\n\u003cp\u003eThe 3300HP has a distinct feel among 10m mobile radios in this price band. The \u003cstrong\u003efront-panel 4-pin microphone jack\u003c\/strong\u003e keeps the cable routing clean at the front of the chassis and makes mic swaps easy on the road — plug in the stock SRA-198, swap to a DRX-6560 or a power mic, all without disturbing the mounting or reaching behind the radio.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eblue LED channel display and blue-illuminated meter\u003c\/strong\u003e are iconic. Combined with the red\/green transmit LED and 3-level dimmer, the 3300HP is genuinely readable at night without being glare-bright — a specific ask from long-haul drivers. Some operators buy this radio for the aesthetic alone.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003edual MOSFET final stage\u003c\/strong\u003e is the reliability story. Twenty years of production means Connex has iterated on the design; the current-production 3300HP uses IRF-520 MOSFETs in the final stage, which are readily available and inexpensive if they ever need service. There's no exotic silicon to source — a good CB shop can maintain this radio indefinitely.\u003c\/p\u003e\n\n\u003ch3\u003eModes and coverage\u003c\/h3\u003e\n\u003cp\u003eAM \/ FM \/ PA. That's it — \u003cstrong\u003eno SSB, no CW, no clarifier\u003c\/strong\u003e. Frequency coverage is 28.015 – 28.465 MHz across 6 bands of 40 channels (240 channels total). The +10 kHz switch lets you shift up by 10 kHz for those \"in-between\" spots operators sometimes use.\u003c\/p\u003e\n\n\u003cp\u003eFM operation on 10 meters is worth calling out. The FM segment of 10m (29.500 – 29.700 MHz) has an active repeater community, and many 10m FM operators want a radio that can run FM cleanly. The 3300HP does FM natively at ~10W carrier — not overpowering, but perfectly adequate for repeater work through a good antenna.\u003c\/p\u003e\n\n\u003ch3\u003eControl set (front panel)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront-panel 4-pin microphone jack\u003c\/li\u003e\n\u003cli\u003eVolume, squelch, mic gain, RF gain\u003c\/li\u003e\n\u003cli\u003eMode selector (AM \/ FM \/ PA)\u003c\/li\u003e\n\u003cli\u003eBand selector (6 bands)\u003c\/li\u003e\n\u003cli\u003eHi\/Lo power output switch\u003c\/li\u003e\n\u003cli\u003eEcho board with 2 controls (delay + volume)\u003c\/li\u003e\n\u003cli\u003eSwitchable talkback (hear yourself through the speaker) — ON only during echo\u003c\/li\u003e\n\u003cli\u003e+10 kHz switch\u003c\/li\u003e\n\u003cli\u003eNB\/ANL switch (noise blanker + automatic noise limiter)\u003c\/li\u003e\n\u003cli\u003e3-level dimmer (Hi\/Med\/Lo) for meter and channel display\u003c\/li\u003e\n\u003cli\u003eRed\/green transmit LED\u003c\/li\u003e\n\u003cli\u003eSmall meter for signal strength and RF power output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnex 3300HP transceiver\u003c\/li\u003e\n\u003cli\u003eRanger SRA-198 4-pin noise-canceling microphone (a $60 mic — a real upgrade over the generic mics that ship with some competitors)\u003c\/li\u003e\n\u003cli\u003eDC power cord\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003eMicrophone clip\u003c\/li\u003e\n\u003cli\u003eConnex factory owner's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 10 meter mobile amateur transceiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 28.015 – 28.465 MHz (6 bands × 40 channels = 240 total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModes:\u003c\/strong\u003e AM, FM, PA (no SSB, no CW, no clarifier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF output — stock:\u003c\/strong\u003e 45W PEP AM (Bird) · 30W RMS (Dosy) · ~10W FM\/AM carrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinals:\u003c\/strong\u003e Dual MOSFET (typically IRF-520 in current production)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency control:\u003c\/strong\u003e PLL synthesizer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna connector:\u003c\/strong\u003e SO-239, 50 ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone:\u003c\/strong\u003e 4-pin, standard, front panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 13.8V DC, ~7A on transmit, 10A fuse recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency counter:\u003c\/strong\u003e Pre-wired for external FC-347 or FC-30 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetering:\u003c\/strong\u003e Small signal-strength and RF-power meter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e Blue LED channel display, 3-level dimmer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 11.25\" L × 7.875\" W × 2.375\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year factory warranty through Connex\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRecommended accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\nStryker SR-A10 10 meter mobile antenna — 10m-tuned trucker's whip, matched to the 3300HP's SO-239 output\u003c\/li\u003e\n\u003cli\u003e\nDRX-9010 external speaker — the internal speaker is adequate; a cabin speaker clears up AM voice at highway noise\u003c\/li\u003e\n\u003cli\u003e\nDRX-6560 upgraded noise-canceling microphone — swap-in upgrade over the stock SRA-198 if you want a warmer voice profile\u003c\/li\u003e\n\u003cli\u003e\nPro Tune and Alignment — bench-align the radio to Connex service-manual specs. Recommended on any radio you plan to keep for years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCross-shopping\u003c\/h3\u003e\n\u003cp\u003eThe 3300HP fills a specific slot in our 10m mobile lineup. Here's how it sits vs the other Ranger and Stryker mobiles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRanger RCI-99N2\u003c\/strong\u003e — mobile at 200W+ PEP with SSB and factory amp switch. Pick this if you need sideband or high power. Twice the price and 6× the current draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Lee\u003c\/strong\u003e — mobile at 45W+ PEP AM\/FM\/PA. Roughly the same power tier as the 3300HP but with a different chassis and control layout. Comparable value.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonghorn Superior N6\u003c\/strong\u003e — base station with SSB\/CW. Different form factor entirely; the 3300HP is your mobile-only choice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDon't forget to add the Pro tune and alignment option at checkout so that your radio is professionally bench-tuned for best performance per the manufacturer's service manual.\u003c\/p\u003e\n\n\u003ch3\u003e10 meter licensing\u003c\/h3\u003e\n\u003cp\u003eThe 10 meter amateur band (28.000 – 29.700 MHz) requires an FCC amateur radio license. Any US-based Technician-class license or higher grants operating privileges on the 10m band. If you're new to amateur radio, read our 10 meter radio license guide for FCC and ARRL testing resources.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\n\u003ch4\u003eCan the Connex 3300HP be used on CB (11 meter)?\u003c\/h4\u003e\n\u003cp\u003eNo. The 3300HP is an FCC Part 97 amateur radio transceiver certified for the 10 meter amateur band. Operating it on the 11 meter CB band (26.965 – 27.405 MHz) is not authorized and would violate FCC regulations. For CB operation, choose a Part 95 CB radio.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the 3300HP have SSB (sideband)?\u003c\/h4\u003e\n\u003cp\u003eNo. The 3300HP is AM\/FM\/PA only. If you need USB or LSB sideband operation, look at the Ranger RCI-99N2 or the Longhorn Superior N6.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the 3300HP have a clarifier?\u003c\/h4\u003e\n\u003cp\u003eNo. There's no clarifier on this radio. The +10 kHz switch shifts your channel up by 10 kHz but is not a variable clarifier. On AM\/FM operation, precise frequency tuning is not required the way it is on sideband.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the 3300HP have a built-in SWR meter?\u003c\/h4\u003e\n\u003cp\u003eNo. The 3300HP has a small meter for signal strength and RF power output only. If you want a built-in SWR meter, look at the Stryker SR-655HPC+ or the Ranger RCI-99N2. For the 3300HP, use an external inline SWR meter at antenna install — SWR verification happens at the antenna, not the radio.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the 3300HP have a frequency counter?\u003c\/h4\u003e\n\u003cp\u003eNot built in, but the radio is pre-wired for an external Connex FC-347 or FC-30 frequency counter (sold separately). Most operators on AM\/FM don't need one — the channel display is accurate.\u003c\/p\u003e\n\n\u003ch4\u003eWhat antenna should I run?\u003c\/h4\u003e\n\u003cp\u003eFor mobile use, a 10m-tuned whip like the Stryker SR-A10 on a heavy-duty mount with a good ground plane. Keep coax runs short and use quality RG-8X or better. All antennas need SWR verification at installation; SWR is verified at the antenna during install, not on the radio.\u003c\/p\u003e\n\n\u003ch4\u003eDo you Pro Tune this radio before shipping?\u003c\/h4\u003e\n\u003cp\u003eOnly if you add the Pro Tune and Alignment option at checkout. A Pro Tune brings the radio to the manufacturer's service-manual specification — deadkey set correctly, modulation balanced. The radio will operate to Connex's stock spec without a tune; a tune ensures it's at the top of that spec.\u003c\/p\u003e\n\n\u003ch4\u003eIs the SRA-198 microphone included, or extra?\u003c\/h4\u003e\n\u003cp\u003eIncluded. The Ranger SRA-198 4-pin noise-canceling microphone ships in the box with every 3300HP. It's a $60 mic if bought separately.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's the warranty?\u003c\/h4\u003e\n\u003cp\u003e1-year factory warranty through Connex. Warranty support runs directly through Connex, not through our shop. This covers manufacturing defects. Physical damage, blown finals from mismatched antennas, and power-supply abuse are not covered.\u003c\/p\u003e\n\n\n\u0026lt;\u0026gt;\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan the Connex 3300HP be used on CB (11 meter)?\u003c\/h3\u003e\n\u003cp\u003eNo. The 3300HP is an FCC Part 97 amateur radio transceiver certified for the 10 meter amateur band. Operating it on the 11 meter CB band (26.965 - 27.405 MHz) is not authorized and would violate FCC regulations. For CB operation, choose a Part 95 CB radio.\u003c\/p\u003e\n\u003ch3\u003eDoes the Connex 3300HP have SSB (sideband)?\u003c\/h3\u003e\n\u003cp\u003eNo. The 3300HP is AM\/FM\/PA only. If you need USB or LSB sideband operation, look at the Ranger RCI-99N2 or the Longhorn Superior N6.\u003c\/p\u003e\n\u003ch3\u003eDoes the Connex 3300HP have a clarifier?\u003c\/h3\u003e\n\u003cp\u003eNo. There is no clarifier on this radio. The +10 kHz switch shifts your channel up by 10 kHz but is not a variable clarifier. On AM\/FM operation, precise frequency tuning is not required the way it is on sideband.\u003c\/p\u003e\n\u003ch3\u003eDoes the Connex 3300HP have a built-in SWR meter?\u003c\/h3\u003e\n\u003cp\u003eNo. The 3300HP has a small meter for signal strength and RF power output only. If you want a built-in SWR meter, look at the Stryker SR-655HPC+ or the Ranger RCI-99N2. For the 3300HP, use an external inline SWR meter at antenna install. SWR verification happens at the antenna, not on the radio.\u003c\/p\u003e\n\u003ch3\u003eDoes the Connex 3300HP have a frequency counter?\u003c\/h3\u003e\n\u003cp\u003eNot built in, but the radio is pre-wired for an external Connex FC-347 or FC-30 frequency counter (sold separately). Most operators on AM\/FM do not need one because the channel display is accurate.\u003c\/p\u003e\n\u003ch3\u003eWhat antenna should I run with the Connex 3300HP?\u003c\/h3\u003e\n\u003cp\u003eFor mobile use, a 10m-tuned whip like the Stryker SR-A10 on a heavy-duty mount with a good ground plane. Keep coax runs short and use quality RG-8X or better. All antennas need SWR verification at installation.\u003c\/p\u003e\n\u003ch3\u003eDo you Pro Tune the Connex 3300HP before shipping?\u003c\/h3\u003e\n\u003cp\u003eOnly if you add the Pro Tune and Alignment option at checkout. A Pro Tune brings the radio to the manufacturer's service-manual specification. The radio will operate to Connex's stock spec without a tune; a tune ensures it's at the top of that spec.\u003c\/p\u003e\n\u003ch3\u003eIs the SRA-198 microphone included with the Connex 3300HP?\u003c\/h3\u003e\n\u003cp\u003eYes. The Ranger SRA-198 4-pin noise-canceling microphone ships in the box with every 3300HP. It's a $60 mic if bought separately.\u003c\/p\u003e\n\u003ch3\u003eWhat is the warranty on the Connex 3300HP?\u003c\/h3\u003e\n\u003cp\u003e1-year factory warranty through Connex. Warranty support runs directly through Connex. This covers manufacturing defects; physical damage, blown finals from mismatched antennas, and power-supply abuse are not covered.\u003c\/p\u003e","brand":"CONNEX","offers":[{"title":"Default Title","offer_id":54031474164077,"sku":"tty1790049221535","price":189.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/8403\/9533\/files\/connex-10-meter-radio---connex-3300hp_1.jpg?v=1790049230","url":"https:\/\/tightcompressfit.shop\/products\/connex-10-meter-radio-connex-3300hp","provider":"My Store","version":"1.0","type":"link"}